What problems should be paid attention to when installing bathroom cabinets?

The bathroom cabinet is about ergonomics and related subject knowledge. If it is not done properly, it will cause backaches and leg cramps. Haha, is it said that it's sore? In this case, let's take a look at the most common standard sizes of bathroom cabinets. The most common standard size of standard size bathroom cabinets is the range of length from 80 cm to 100 cm, and the range of width from 45 cm to 50 cm. Just adjust it according to the actual situation of the home. For ordinary people, the size of the bathroom is basically fixed, and the difference in area is not large. For very large bathroom cabinets and super super small bathroom cabinets, it is rare in the market, so it is made according to the standard size. There are relatively more bathroom cabinets. Of course, in addition to the standard size, there are also 120 cm. The size of bathroom cabinets of different styles is different. For the installation height, the installation height of different reference objects is also different: the distance between the countertop and the ground: 1. The installation height standard of the floor-standing bathroom cabinet is that the distance between the highest point of the bathroom cabinet and the ground is 80 cm-85 cm range; 2 , The installation height standard of the wall-mounted bathroom cabinet is that the highest point of the bathroom cabinet is 40 cm-50 cm in the range of the room above the ground. Installation process 1. When installing, select the installation location, measure the height with a tape measure and mark it. 2. Install the main cabinet first at the marked position by drilling holes with air. 3. Install the washbasin and fix it with glass glue. Then install the faucet, and then the drain.

4. Install mirrors and shelves. The installation is complete. Note 1. Confirm the installation position of the bathroom cabinet. Before paving the floor tiles and wall tiles, confirm the installation position of the bathroom cabinet. Since the installation of the bathroom cabinet requires holes in the wall, water inlet and drainage are required. Hole, once installed, usually cannot move the position, confirming the installation position of the bathroom cabinet is a prerequisite before installation. 2. After confirming the shape and size of the bathroom cabinet, the shape and size of the bathroom cabinet can only be determined according to the installation position. 3. Look for the piping diagram of the water pipe and the wiring diagram of the wire. When installing, it is necessary to drill holes on the wall with a blow hole. It is very important to confirm the piping diagram and wiring diagram before installation. If the water pipe or wire circuit is broken, part of the wall must be pried. Bricks, causing unnecessary losses. So this is why the owner must be required to keep the drawings of the hydropower construction after the completion of the hydropower construction. 4. Confirm that the installation height of the bathroom cabinet has been mentioned above, so I won’t be tired of it. The height needs to be calculated from the floor tiles to the upper part of the washbasin. The actual installation height should be determined according to the height and usage habits of the family members, but it is the most suitable within the standard height range.Xinhi has been established since 2002, an outstanding enterprise in the bathroom cabinet and bathroom cabinet industry in China--who combines R&D, manufacture, marketing, and service in this field.with 18 years' experience, exports to more than 60 countries, we can offer you high-quality and professional service. Xinhi is located in Yinong Industry, Xiaoshan District, Hangzhou City, the area reaches more than 35000 square meters, adjacent to Shanghai-Hangzhou-Ningbo.